Altronics DCBox  (Delay Control Box) makes Delay Box setup simple. Clear, easy-to-navigate screens put dial-ins, delays, timers, and shift settings at your fingertips—without memorizing button sequences or searching through a manual. Spend less time finding settings and more time focusing on your race.

Add the optional Power Distribution Module (PDM) to control vehicle accessories from the same touchscreen—including starter, ignition, fuel pump, water pump, fan, and lights. Start with eight channels and expand to sixteen.

DCBox features a glove friendly, sunlight readable, touch screen that is packed with advanced Delay Box-Control features.  

• Automatic crossover calculation from your dial-in and opponent’s dial-in.
• CrossTalk compatibility.
• Separate saved Bracket/Full Tree and Pro Tree programs.
• 4 Button control with 5 modes
  • One-hit or two-hit operation with separate delay settings.
  • One- or two-button triggering.
  • Release or Press-to-trigger operation.
  • Programmable Tap/Bump Up and Down adjustments.
  • Flinch protection.
• Throttle-stop control - 4 stages.
• Programmable throttle-stop override or timer bump-down.
• Starting-line throttle assist control.
• General Purpose 4 stage timers, nitrous, boost, retard, etc..
• Selectable normally-on/normally-off timer operation.
• Shift on Time or RPM.  PRO version
• Line-lock control for staging. PRO version
• RPM display and recording with on-screen run replay.
• Multiple-pass recording storage.
• Post-run information identifying the launching hit, hit differential, and tap/bump counts, how late.
• Transbrake interrupt or lockout protection.
• Instant reset/cancel.
• Built-in driver reaction-time tester. PRO version
• Electronic output overload/short-circuit protection.
• 12- and 16-volt compatibility.
• Sunlight readable touch screen with brightness control.
• Glove-friendly operation.
• Fully User Updateable and Upgradable from included memory card (In case we forgot anything!)

Integrated multiple Dial-board display control. Dial-boards are multi color selectable and have brightness control.

AND Optional - Integrated Switch Panel with (PDM) Power Distribution Module for complete vehicle control!

Altronics has designed the DCBox sytem to help reduce costly options and features associated with multi-platform systems. This integrated switch panel allows you to press one button to start the car and operate multiple electrical devices including water, fuel, fan, lights, ignition, and other options.

Robust harness featuring color coded and keyed pluggable connectors allow for 12 awg wiring.  Harness plugs are workable to allow for removal of unused channels or for changing wire size for appropriate amp load for controlled  components.

• Automatic switches can be time delayed to turn on after Start button is pressed, allowing easier engine cranking before ignition and fuel is enabled with less risk of flooding.
• Resettable solid state fuse allows you to preset 1-30 amps on each channel. (No more replacing blown fuses)
• Switches can be limit programmed (e.g., Water pump will turn on when the engine temperature is above 120 degrees)
• Switches feature soft start option to eliminate in-rush current when load is first turned on.
• Switches can be set to Momentary or Toggle.
• 12 and 16 volt compatible.
• 3 Trigger inputs (Low Oil Pressure, Lean out, etc.)
• 8 Channel Standard
• Optional 16 channel expandable/upgradable

Channels can be controlled by temperature (Fan, Water Pump)

Each channel is individually configurable Example: NOS Purge configurable

Choose from Radlock Quick Disconnect Battery Terminal or Threaded battery post.

Includes Color coded 12AWG harness (10' standard, Custom lengths available)

Optional Battery cable 10'.  Terminated with Radlock or 5/16" eyelit.

Additional Module for 16 Channel Control