 |
|
|
 |
Motor
sports most accurate and only patented weather station the
PerformAIRE V6.0 air quality computer monitors the temperature,
absolute barometric pressure, relative humidity, and the percentage
of oxygen in the atmosphere through its state of the art electronic
sensors. This information is transmitted into a microprocessor
where density altitude, oxygen altitude, and predicted values
are calculated and displayed to incredible accuracy through
exact scientific equations formulated specifically for internal
combustion engines (verified by authorities in atmospheric
research). |
|

Patent
#5,509,295
Invented and Manufactured By

|
|
|
SPONSOR
Over
$200,000 in Contingency Offered!
|
|
|
|
|
| |
| FEATURES |
| Portable |
| Ultra
Quick Response |
| Temperature |
| Relative
Humidity |
| Absolute
Pressure |
| Air
Density Ratio |
| Dew
Point |
| Vapor
Pressure |
| %
Oxygen* |
| Density
Altitude |
| Oxygen
Altitude* |
| Data
Entry Keypad |
| Large
LCD Display |
| Stores
400 Runs |
| 10
Data Bases |
| ET
Prediction |
| Last
Air Sample Hold |
| Run
Completion |
| Bad
Run Detection |
| Throttle
Stop Prediction |
| Throttle
Stop Ratio |
| Last
Air Sample Hold |
| 1
Run Predictions |
| Wind
Correction |
| Multiple
Variable Prediction |
|
Sea
Level ET
|
| Downloading*
|
| Data
Analysis* |
| *(Optional) |
|
A
density altitude measurement can easily be off many hundred
feet when considering a change in the percent of oxygen in
the atmosphere. The optional oxygen sensing capability allows
the PerformAIRE to measure the percent of oxygen in the atmosphere.
By knowing the density and the percentage of oxygen in the
atmosphere the PerformAIRE can calculate the exact amount
of oxygen in the atmosphere, which directly relates to performance.
The
PerformAIRE computer contains a data base that allows for
storage of runs and then uses this data to automatically
predict ETs, Throttle Stop Settings, Jet Sizes, etc. The
predicted values are continually updated with each new sample
of air. The density altitude and oxygen altitude will automatically
be stored with each run if an oxygen sensor has been installed.
The stored runs are also tagged with a time and date stamp
to allow for later referencing. The expandable data base
is capable of storing hundreds of runs and will allow those
runs to be stored in separate data bases, which can be labeled
for specific cars or tracks.
The
PerformAIRE V6.0 is packed with the same prediction capabilities
as the original PerformAIRE, but also allows for 1 run predictions
with preset and user defined ratios, multiple weather variable
predictions (density altitude, oxygen altitude, air density
ratio, correction factor, dew point, and vapor pressure),
and corrects prediction for wind effects, which are customizable.
The
PerformAIRE computer's data base can be downloaded into
a PC. One click of a mouse can download the data directly
into a spreadsheet where the runs will be automatically
charted showing a visually relationship between your cars
performance and the changing atmosphere. This allows for
the easy removal of bad runs from a database and more accurate
predictions.
|
|
| Besides
all the added features and ease of use, there is one main reason
why the PerformAIRE air quality computer is superior to all other
weather stations/calculators. First one must ask themselves, what
is the most important capability a weather station must possess?
We hope you would answer the ability to accurately and repeatedly
measure the atmosphere one is racing in. A weather station without
this quality is useless.
Detecting
small changes in the atmosphere or using inaccurate measurements
can be the difference between winning and losing. As little as
a 100 foot change in density altitude can noticeably change the
performance of an automobile. Most racers do not realize that
a minor change in the atmosphere can equate to a major change
in density or oxygen altitude. On average, a 1degree change in
temperature, a 0.1 inHg change in pressure, a 10% change in humidity,
or a 0.1% change in oxygen can be more than a 100 foot change
in altitude. Instruments being used in other weather stations
have variables that make it impossible to measure the atmosphere
at a level needed to predict the performance of a racecar. These
inaccuracies can stem from a personÕs inability to correctly
distinguish what the instrument is reading, the effect temperature
has on the instrument, and the instruments accuracy/repeatability
ratings.
The
following examples further explain common errors found by using
other weather stations.
Ex:
Ask five people to tell you what the same dial temperature meter
is reading and they will all give you a different number.
Ex:
Most racers do not consider the effect a change in temperature
can have on an uncompensated digital or mechanical barometer or
hydrometer. A barometer calibrated at 70 degrees measures 29.00inHg.
Then it is exposed to the heat of 90 degrees, but with the same
pressure. The components that make up this barometer can expand
or contract causing it to measure 29.25inHg. An error of 0.25inHg
would cause over a 250' Density Altitude error. Since changes
in temperature, humidity, pressure, and % oxygen do not equate
linearly with altitude, it is unfeasible to state that an inaccurate
or non calibrated instruments will produce correct results. A
temperature gage that always measures 5 degrees high in temperature
will not allow for accurate predictions.
When
trying to use standard weather instruments (digital or mechanical)
one would be lucky to compute density altitude within a few hundred
feet of the actual.
The
PerformAIRE air quality computer's state of the art sensors allow
it to measure density altitude with an accuracy of better than
plus or minus 50 feet over the entire temperature range and with
even closer repeatability. No other weather station, digital or
mechanical, can claim this degree of accuracy. Not even other
all in one digital weather station has this degree of accuracy!
|
|
Download/Data
Analysis Kit
Click
here for demo!
|
|
|
|
|
Automatically
generates graph that show bad runs and how data effects predictions.
Carrying
Case Part# ALT-PA2-CC
PRICE
LIST
|
| Part
# |
Price |
Description |
Purchase |
| ALT-PA2 |
$424.99 |
PerformAIRE-model(PA2)
|
|
| ALT_PA2-O2 |
$724.99 |
PerformAIRE
w/oxygen-model(PA2-O2) |
|
| ALT_PA2_CC |
$24.99 |
PA2-CC |
|
| ALT-PADL-SW-Serial |
$74.99 |
Downloading
kit (Serial Cable) |
|
| ALT-USBCONV |
$74.99 |
Serial
to USB converter |
|
|
|
PerformAIRE
weather systems are completely upgradable. All options can
be added.
|
|
|
|
|
|
|
|